Show Spanning-Tree 0 - Dell Force10 S4810P Reference Manual
Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)
Hide thumbs
Also See for Force10 S4810P:
- Manual (60 pages) ,
- Quick start manual (27 pages) ,
- Configuration manual (1144 pages)
Table of Contents
Advertisement
show spanning-tree 0
Display the spanning tree group configuration and status of interfaces in the spanning tree group.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show spanning-tree 0 [active | brief | guard | interface
interface | root | summary]
Parameters
0
active
brief
guard
interface
interface
root
summary
Command Modes
EXEC Privilege
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.4.2.1
Version 8.3.7.0
1546
Enter 0 (zero) to display information about that specific spanning tree
group.
(OPTIONAL) Enter the keyword active to display only active
interfaces in spanning tree group 0.
(OPTIONAL) Enter the keyword brief to display a synopsis of the
spanning tree group configuration information.
(OPTIONAL) Enter the keyword guard to display the type of guard
enabled on an STP interface and the current port state.
(OPTIONAL) Enter the keyword interface and the type slot/port of
the interface you want displayed. Type slot/port options are the
following:
•
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
•
For a SONET interface, enter the keyword sonet followed by
the slot/port information.
•
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 ti 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
(OPTIONAL) Enter the keyword root to display configuration
information on the spanning tree group root.
(OPTIONAL) Enter the keyword summary to only the number of ports
in the spanning tree group and their state.
Introduced on the Z9000.
Added support for 4-port 40G line cards on the E-Series ExaScale.
Added support for the optional guard keyword on the C-Series, S-
Series, and E-Series TeraScale.
Introduced on the S4810.
Advertisement
Table of Contents
