Dell Force10 S4810P Reference Manual page 1343

Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 S4810P:

Table of Contents

Version 7.5.1.0

You can use the show qos statistics command on the C-Series, but the keyword

wred-profile must be omitted in the syntax. The show qos statistics output

command differs from the ED and EE series line cards and the EF series line cards. The QoS

statistics for the EF series generates two extra columns, Queued Pkts and Dropped Pkts

(Example 2).

Example (ED, EE)

FTOS#show qos statistics

Interface Gi 0/0

Queue# Queued Bytes Matched Pkts Matched Bytes

Interface Gi 0/1

Queue# Queued Bytes Matched Pkts Matched Bytes

The following describes the show qos statistics command Example below.

Field (ED and EE)

Queued Bytes

Matched Pkts

Introduced on the C-Series.

Introduced on the E-Series.

NOTE: The show qos statistics command displays Matched Packets and

Matched Bytes. The show queue statistics egress command (E-Series only)

displays Queued Packets and Queued Bytes. The following example explains how these

two displays relate to each other:

9000 byte size packets are sent from Interface A to Interface B.

The Matched Packets on Interface A are equal to the Queued Packets on

Interface B.

Matched bytes on Interface A = matched packets *9000

Queued bytes on Interface B = queued packets *(9020)—Each packet has an

additional header of 20 bytes.

Queue Number

Snapshot of the byte count in that queue.

The number of packets that matched the class-map criteria.