Router-Id - Dell Force10 S4810P Reference Manual

metric-type
value
1 = Type 1 external route
2 = Type 2 external route
route-map
name
tag
Defaults Not configured.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command History
Version 9.1.(0.0)
Version 7.8.1.0
Version 7.4.1.0
Usage
To redistribute the default route (x:x:x:x::x), configure the default-information originate
Information
command.
Related
default-
Commands
information
originate

router-id

Designate a fixed router ID.
C-Series, E-Series, Z-Series, S4810
Syntax router-id ip-address
To return to the previous router ID, use the no router-id
Parameters
ip-address
1226
Default: 20
type-
(OPTIONAL) Enter the keyword metric-type followed by the OSPFv3
link state type of 1 or 2 for default routes. The values are:
Default: 2
map-
(OPTIONAL) Enter the keyword route-map followed by the name of an
established route map. If the route map is not configured, the default
is deny (to drop all routes).
tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPFv3.
Range: 0 to 4294967295
Default: 0
Introduced support for OSPFv3 on the S4810 and Z9000.
Added support for the C-Series.
Introduced on the E-Series.
Configure default external route into OSPFv3.
Enter the router ID in the dotted decimal format.
ip-address command.