Description; Distance - Dell Force10 S4810P Reference Manual

description

Enter a description of the IS-IS routing protocol.
C-Series, E-Series, S-Series, S4810
Syntax description {description}
To remove the description, use the no description {description} command.
Parameters
description
Defaults none
Command Modes ROUTER ISIS
Command History
Version 8.3.12.0
pre-7.7.1.0
Related router isis
Commands

distance

Define the administrative distance for learned routes.
E-Series, S4810
Syntax distance weight [ip-address mask [prefix-list]]
To return to the default values, use the no distance weight command.
Parameters
weight
ip-address mask
prefix-list
Defaults weight = 115
Command Modes
976
Enter a description to identify the IS-IS protocol (80 characters
maximum).
Introduced on the S4810.
Introduced.
– Enter ROUTER mode on the switch.
The administrative distance value indicates the reliability of a routing
information source. The range is 1 to 255. (A higher relative value
indicates lower reliability. Routes with smaller values are given
preference.) The default is 115.
(OPTIONAL) Enter an IP address in dotted decimal format and enter a
mask in either dotted decimal or /prefix format.
(OPTIONAL) Enter the name of a prefix list name.
for IPv4 )
• ROUTER ISIS (
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6 )