Service-Policy Input - Dell Force10 S4810P Reference Manual

service-policy input

Apply an input policy map to the selected interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy input
policy-map-name [layer2] command.
Parameters
policy-map-name
layer2
Defaults Layer 3
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
pre-Version
6.1.1.1
Usage You can attach a single policy-map to one or more interfaces to specify the service-policy for
Information those interfaces. A policy map attached to an interface can be modified.
Related policy-map-input
Commands
1330
Enter the name for the policy map in character format (16 characters
maximum). You can identify an existing policy map or name one that
does not yet exist.
(OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class
Map. The default is Layer 3.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
E-Series Only: Expanded to add support for Layer 2.
Introduced on the E-Series.
NOTE: The service-policy commands are not allowed on a port channel. The
service-policy input policy-map-name command and the service-
class dynamic dot1p command are not allowed simultaneously on an interface.
However, the service-policy input command (without the policy-map-name
option) and the service-class dynamic dot1p command are allowed on an
interface.
– creates an input policy map.