Mac Cam Fib-Partition; Mac Learning-Limit - Dell Force10 S4810P Reference Manual

Usage For details about using this command, refer to the "NIC Teaming" section of the Layer 2
Information chapter in the

mac cam fib-partition

Reapportion the amount of content addressable memory (CAM) available for MAC address learning forwarding
information base (FIB) versus the amount available for MAC ACLs on a line card.
E-Series
Syntax mac cam fib-partition {25 | 50 | 75 | 100} slot-number
To return to the default setting, use the no mac cam fib-partition command.
Parameters
25
50
75
100
slot-number
Defaults 75 (75% of the MAC CAM for MAC address learning)
Command Modes CONFIGURATION
Usage After setting the CAM partition size, the line card resets.
Information
Related show mac cam
Commands

mac learning-limit

Limit the maximum number of MAC addresses (static + dynamic) learned on a selected interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mac learning-limit address_limit [vlan vlan-id] [dynamic]
[station-move]
Parameters
address_limit
vlan
FTOS Configuration Guide .
Enter the keyword 25 to set aside 25% of the CAM for MAC address
learning.
Enter the keyword 50 to set aside 50% of the CAM for MAC address
learning.
Enter the keyword 75 to set aside 75% of the CAM for MAC address
learning.
Enter the keyword 100 to set aside 100% of the CAM for MAC
address learning. With this configuration, no MAC ACLs are
processed.
Enter the line card slot number. The range is 0 to 13 for the E1200, 0 to
6 for the E600, and 0 to 5 for the E300.
– displays the current MAC CAM partition values.
Enter the maximum number of MAC addresses that can be learned on
the interface. The range is 1 to 1000000.
vlan-id
E-Series only: Enter the keyword followed by the VLAN ID. The range
is 1 to 4094.
1033