Iscsi Optimization; Advertise Dcbx-App-Tlv; Iscsi Aging Time - Dell Force10 S4810P Reference Manual

iSCSI Optimization

Internet small computer system interface (iSCSI) optimization enables quality-of-service (QoS) treatment for iSCSI
storage traffic on an S4810 system.
Use the following Dell Force10 operating software (FTOS) commands to configure and verify the iSCSI optimization
feature.

advertise dcbx-app-tlv

Configure DCBX to send iSCSI TLV advertisements.
S4810
Syntax advertise dcbx-app-tlv iscsi
To disable DCBX iSCSI TLV advertisements, use the no advertise dcbx-app-tlv
iscsi command.
Defaults Enabled
Command Modes PROTOCOL LLDP
Command History
Version 8.3.12.0
Version 8.3.16.0
Usage You can configure iSCSI TLVs to send either globally or on a specified interface. The interface
Information configuration takes priority over global configuration.

iscsi aging time

Set the aging time for iSCSI sessions.
S4810
Syntax iscsi aging time time
To remove the iSCSI session aging time, use the no iscsi aging time command.
Parameters
time
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
Enter the aging time for the iSCSI session. The range is 5 to 43,200
minutes.
28
959