Clock Summer-Time Recurring - Dell Force10 S4810P Reference Manual

Related
calendar set
Commands

clock summer-time recurring

daylight saving time each year.
show clock
clock summer-time recurring
Set the software clock to convert to daylight saving time on a specific day each year.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clock summer-time time-zone recurring [start-week start-day
start-month start-time end-week end-day end-month end-time
[offset]]
To delete a daylight saving time zone configuration, use the no clock summer-time
command.
Parameters
time-zone
start-week
start-day
start-month
start-time
end-week
– sets the hardware clock.
– sets a date (and time zone) on which to convert the switch to
– displays the current clock settings.
Enter the three-letter name for the time zone. This name is displayed
in the show clock output. You can enter up to eight characters.
(OPTIONAL) Enter one of the following as the week that daylight
saving begins and then enter values for start-day through end-time:
• week-number: Enter a number from 1 to 4 as the number of
the week in the month to start daylight saving time.
• first: Enter this keyword to start daylight saving time in the
first week of the month.
• last: Enter this keyword to start daylight saving time in the
last week of the month.
Enter the name of the day that you want daylight saving time to begin.
Use English three letter abbreviations; for example, Sun, Sat, Mon,
etc. The range is Sun to Sat.
Enter the name of one of the 12 months in English.
Enter the time in hours:minutes. For the hour variable, use the 24-hour
format; example, 17:15 is 5:15 pm.
Enter the one of the following as the week that daylight saving ends:
• week-number: enter a number from 1 to 4 as the number of
the week to end daylight saving time.
• first: enter the keyword first to end daylight saving
time in the first week of the month.
• last: enter the keyword last to end daylight saving time in
the last week of the month.
1557