Rmon Event - Dell Force10 S4810P Reference Manual

To remove RMON MIB statistics collection on an interface, use the no rmon collection
statistics {controlEntry integer} command.
Parameters
controlEntry
integer
owner
Defaults none
Command Modes CONFIGURATION INTERFACE (config-if)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.0

rmon event

Add an event in the RMON event table.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax rmon event number [log] [trap community] [description string]
[owner name]
To disable RMON on an interface, use the no rmon event number [log] [trap
community] [description string] command.
Parameters
number
log
trap
description
1380
Enter the keyword controlEntry to specify the RMON group of
statistics using a value. Then enter an integer value from 1 to 65535
that identifies the RMON Statistic Table. The integer value must be a
unique in the RMON statistic table.
name
(OPTIONAL) Enter the keyword owner followed by the owner name
to record the owner of the RMON group of statistics.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Assign an event number in integer format from 1 to 65535. The number
value must be unique in the RMON event table.
(OPTIONAL) Enter the keyword log to generate an RMON log entry.
The log entry is triggered and sets the eventType in the RMON MIB to
log or log-and-trap. The default is No log.
community
(OPTIONAL) Enter the keyword trap followed by an SNMP
community string to configure the eventType setting in the RMON
MIB. This sets either snmp-trap or log-and-trap. The default is public.
string
(OPTIONAL) Enter the keyword description followed by a string
describing the event.