Ip Ssh Key-Size; Ip Ssh Password-Authentication - Dell Force10 S4810P Reference Manual

Related
ip ssh pub-key-file
Commands
ip ssh rhostsfile

ip ssh key-size

Configure the size of the server-generated RSA SSHv1 key.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip ssh key-size 512-869
Parameters
512-869
Defaults Key size 768
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage The server-generated key is used for SSHv1 key-exchange.
Information

ip ssh password-authentication

Enable password authentication for the SSH server.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-authentication
enable command.
Parameters
enable
Defaults Enabled
1446
• checking client host-keys is done with the file specified in the ip ssh pub-key-
file command.
NOTE: Administrators must specify the two files (rhosts and pub-key-file) to
configure host-based authentication.
– public keys of trusted hosts from a file.
– trusted hosts and users for rhost authentication.
Enter the key-size number for the server-generated RSA SSHv1 key.
The range is 512 to 869. The default is 768.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword enable to enable password-authentication for
the SSH server.