Upgrade System Stack-Unit (S-Series Stack Member) - Dell Force10 S4810P Reference Manual

upgrade system stack-unit (S-Series stack member)

Copy the boot image or FTOS from the management unit to one or more stack members.
S-Series, S4810
Syntax upgrade {boot | system} stack-unit {all | 0-11 | A | B}
Parameters
boot
system
all
0-11
A
B
Defaults none
Command Modes EXEC
Command History
Version 7.7.1.0
Usage To reboot using the new image, use the upgrade boot system stack-unit
Information
command.
Related
Commands
Enter the keyword boot to copy the boot image from the
management unit to the designated stack members.
Enter the keyword system to copy the FTOS image from the
management unit to the designated stack members.
Enter the keyword all to copy the designated image to all stack
members.
Enter the unit ID of the stack member to which to copy the designated
image.
Enter the keyword A to upgrade all stacked units in System A (S4810
only).
Enter the keyword B to upgrade all stacked units in System B (S4810
only).
Introduced on the S-Series.
• reload – reboots FTOS.
• reset stack-unit – resets the designated S-Series stack member.
• show system (S-Series)
member.
• show version – displays the current FTOS version information on the system.
• upgrade (S-Series management unit)
image of the S-Series management unit.
— displays the status of all stack members or a specific
— upgrades the bootflash image or system
1527