Show Ip Pim Neighbor - Dell Force10 S4810P Reference Manual

Field
Nbr Count
Query Intvl
DR Prio
DR
Example
E600-7-RPM0#show ip pim interface
Address
172.21.200.254 Gi 7/9
172.60.1.2
192.3.1.1
192.4.1.1
172.21.110.1
172.21.203.1

show ip pim neighbor

View PIM neighbors.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip pim neighbor
Command Modes
Command History
Version 8.3.11.1
Version 8.3.12.0
Version 8.1.1.0
Version 7.8.1.0
Usage The following describes the show ip pim neighbor command shown in the Example
Information
below.
Field
Neighbor address
Interface
1248
Description
•
Displays the number of PIM neighbors discovered over this
interface.
Displays the query interval for Router Query messages on that
interface (configured with ip pim query-interval
command).
Displays the Designated Router priority value configured on the
interface (use the ip pim dr-priority command).
Displays the IP address of the Designated Router for that interface.
Interface Ver/ Nbr
Gi 7/11
Gi 7/16
Gi 13/5
Gi 13/6
Gi 13/7
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Description
Displays the IP address of the PIM neighbor.
List the interface type, with either slot/port information or ID (VLAN
or Port Channel), on which the PIM neighbor was found.
S = PIM Sparse mode
Query DR
Mode Count Intvl Prio
v2/S 0 30 1
v2/S 0 30 1
v2/S 1 30 1
v2/S 0 30 1
v2/S 0 30 1
v2/S 0 30 1
DR
172.21.200.254
172.60.1.2
192.3.1.1
192.4.1.1
172.21.110.1
172.21.203.1