Avaya S8700 Maintenance Manual page 318

Maintenance Commands
Output
Fiber Link #
Board Location
Board Type
DS1 Converter?
Fiber
Translation
Converter
Type of
Transceivers
Converter Type
The following fields appear on page 2 when a DS1 CONV complex is
administered on the fiber link. Only the DS1 CONV complex attributes are
administered here. The circuit pack itself is administered by change circuit
pack . Entries on page 2 represent the A-PNC. If the PNC is duplicated, these
fields are repeated on page 3 for the B-PNC. Page 3 has display-only fields that
can be changed only by changing their counterpoints on page 2.
Board Location
DS1 Converter
Facilities
Facility
Installed?
7-62 Issue 1 May 2002
This display-only field shows the identifying number of the fiber link
entered on the command line.
The physical address (cabinet-carrier-slot) of the circuit packs comprising
the two endpoints (ENDPOINT-1 and ENDPOINT-2) of the fiber link.
This display-only field shows the type of circuit pack administered at each
endpoint ("ei" or "sni").
y indicates that a DS1C converter complex is used on this link to remotely
locate a port network. If this is the case, a second page displays for
administration of the DS1C complex attributes.
Enter multi-mode or single-mode. This field is used for faster remote
diagnosis.
Enter y or n. This field is used for faster remote diagnosis.
Enter A or B. This field is used for faster remote diagnosis.
Enter Avaya or other. Appears when the converter field on the Fiber Link
Administration screen is set to y.
This field under the heading DS1C-1 is used to define the physical
location of the converter board connected to ENDPOINT-1. It is a data
entry field consisting of the board's physical address by
cabinet-carrier-slot. When the location is entered, validation is performed
to ensure that the board has been administered and is of the correct type
(DS1 CONV).
The fields under this heading define attributes of the four DS1 facilities (A,
B, C, D) that can be connected to the DS1 CONV.
This specifies (y or n) whether the indicated facility has been provided and
installed. Facility A is required for the DS1 CONV complex.
555-233-143