Show Gre Tunnel - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show gre tunnel

show gre tunnel [ detail ] [ state tunnelStatus ]
Syntax
[ tunnelName | [ virtual-router vrName ] ip ipAddress ] [ filter ] [ summary ]
To display summary information:
show gre tunnel summary [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays information about GRE tunnels.
Description
Options
Privileged Exec
Mode
Related Topics
detail Shows detailed tunnel information about GRE tunnels
tunnelStatus State of tunnels for which information is displayed; one of the
following:
disabled Tunnel is disabled
down Tunnel is not operational
enabled Tunnel is enabled
lower-down Interface layer lower below the tunnel is not operational
not-present Tunnel service module is not in slot
up Tunnel is operational
tunnelName Name of a tunnel for which you want to display information
vrName Name of a virtual router for which tunnel information is displayed
ipAddress IP address associated with tunnel
filter See Filtering show Commands on page 4
summary Displays summary information
Monitoring GRE Tunnel Information
Chapter 7: S Commands
687
show gre tunnel