Ip Dvmrp Announce-Filter - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

ip dvmrp announce-filter

ip dvmrp announce-filter listName
Syntax
no ip dvmrp announce-filter
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a list of DVMRP routes that the router will advertise on an interface. The
Description
no version restores the default situation, in which the router advertises all known
routes on the interface.
Options
Interface Configuration
Mode
listName Name of the IP access list that specifies the DVMRP routes that the
router will advertise on the interface. You can specify a simple or extended access
list; with an extended access list you can specify an address and a subnet mask.
Chapter 10: I Commands
ip dvmrp announce-filter
769