Aaa Accounting Acct-Stop On-Access-Deny - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

aaa accounting acct-stop on-access-deny

aaa accounting acct-stop on-access-deny { enable | disable }
Syntax
no aaa accounting acct-stop on-access-deny
Command introduced before JUNOSe Release 7.1.0.
Release Information
Issues an Acct-Stop message if RADIUS denies access. The no version returns the
Description
parameter to the default of disable.
Options
Global Configuration
Mode
enable Specifies the feature
disable Disables the feature; this is the default setting
Chapter 2: A Commands
aaa accounting acct-stop on-access-deny
23