Arp Spoof-Check - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

arp spoof-check

[ no ] arp spoof-check
Syntax
Command introduced in JUNOSe Release 9.3.0.
Release Information
Configures the router to check for spoofed ARP packets received on an IP interface.
Description
By default, the router checks all ARP packets received on a major IP interface or a
subinterface to identify and discard spoofed ARP packets. The no version disables
checking for spoofed ARP packets received on the interface.
Interface Configuration
Mode
144
arp spoof-check