Area Virtual-Link Hello-Interval - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

area virtual-link hello-interval

[ no ] area { areaId | areaIdInt } virtual-link ipAddress hello-interval helloInterval
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines an OSPF virtual link and the time between the hello packets. The hello interval
Description
value must be the same for both ends of the virtual link. The no version removes
the virtual link's hello interval.
Options
Router Configuration
Mode
138
area virtual-link hello-interval
areaId OSPF area ID in IP address format.
areaIdInt OSPF area ID as a decimal value in the range 0–4294967295
ipAddress IP address associated with the virtual link neighbor
helloInterval Integer in the range 1–65535 seconds; default value is 10 seconds