Area Virtual-Link Dead-Interval - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

area virtual-link dead-interval

[ no ] area { areaId | areaIdInt } virtual-link ipAddress dead-interval deadInterval
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines an OSPF virtual link and the time interval allowed for detecting a dead router.
Description
The no version removes the virtual link's dead interval.
Options
Router Configuration
Mode
areaId OSPF area ID in IP address format
areaIdInt OSPF area ID as a decimal value in the range 0–4294967295
ipAddress IP address of the virtual link neighbor
deadInterval Integer in the range 0–2147483647 seconds; default value is 40
seconds
Chapter 2: A Commands
area virtual-link dead-interval
137