Area Virtual-Link Authentication-None - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

area virtual-link authentication-none

[ no ] area { areaId | areaIdInt } virtual-link ipAddress authentication-none
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies that no authentication is to be used for the virtual link. The no version has
Description
no effect.
Options
Router Configuration
Mode
136
area virtual-link authentication-none
areaId OSPF area ID in IP address format
areaIdInt OSPF area ID as a decimal value in the range 0–4294967295
ipAddress IP address of the virtual link neighbor