Aps Manual - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

aps manual

aps manual channelNumber
Syntax
no aps manual
Command introduced before JUNOSe Release 7.1.0.
Release Information
Forces the working interface to switch to the protect interface, unless a request of
Description
equal or higher priority exists. The no version allows the specified working interface
to resume the active role.
Options
Controller Configuration
Mode
channelNumber—One of the following channel numbers:
0 Switches from the protect interface back to the working interface
1 Switches from the working interface to the protect interface
Chapter 2: A Commands
119
aps manual