Aaa User Accounting Interval - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

aaa user accounting interval

aaa user accounting interval period
Syntax
no aaa user accounting interval
Command introduced in JUNOSe Release 9.0.0.
Release Information
Specifies the default user accounting interval used on the virtual router. This router
Description
uses this value for users when no value is specified in the RADIUS Acct-Interim-Interval
attribute (RADIUS attribute 85). The no version restores the default setting of 0, which
turns off interim accounting for users attached to this virtual router.
NOTE: This command and the aaa service accounting interval command replace
the deprecated aaa accounting interval command, which may be removed
completely in a future release.
Options
Global Configuration
Mode
period Accounting interval in minutes in the range 10–1440, which sets the
time period between accounting updates for users on this virtual router; 0 is the
default
Chapter 2: A Commands
aaa user accounting interval
75