Aaa Subscriber Limit Per-Vr - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

aaa subscriber limit per-vr

aaa subscriber limit per-vr limitValue
Syntax
no aaa subscriber limit per-vr
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the maximum number of active subscribers permitted on the virtual router. The
Description
no version returns the limit to the default, 0 (zero).
Options
Global Configuration
Mode
60
aaa subscriber limit per-vr
limitValue Maximum number of subscribers; default value is 0 (zero), which
means there is no limit on the number of subscribers