Display Onuinfo - 3Com S7906E Command Reference Manual

Description
Use the display onu-event interface command to display the registration and deregistration records of
an ONU.
The system supports up to 50 records for each ONU. After the number of records for an ONU
reaches this maximum number, the old records will be overwritten by the new ones.
If an ONU port is unbound from its ONU or the EPON card is reset, records will be cleared.
Examples
# Display the registration and deregistration information of the ONU.
<Sysname> display onu-event interface onu 3/0/1:1
Date Time
2007/07/28 13:57:03
2007/07/28 18:00:06
Table 1-9 display onu-event interface command output description
Field
Date
Time
ONU Event
ONU Status

display onuinfo

Syntax
display onuinfo { interface interface-type interface-number | slot slot-number }
View
Any view
Default Level
2: System level
Parameters
interface-type: Port type, which can be OLT or ONU.
interface-number: OLT/ONU port number.
ONU Event ONU Status
Registration Down
Deregistration Up
Date of the ONU event
Time of the ONU event
ONU event:
Registration
Deregistration
ONU status when an ONU event occurs:
Up: when the ONU status is up, the ONU is deregistered.
Down: when the ONU status is down, the ONU is registered.
1-13
Description