Display Isis Interface - 3Com 7750 Series Command Reference Manual

3com switch command reference guide
Hide thumbs Also See for 7750 Series:
Table of Contents

Advertisement

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
interval between SPFs:

4.1.5 display isis interface

Syntax
display isis interface [ verbose ]
View
Any view
Parameter
verbose: Displays the detailed information about the interface.
Description
Use the display isis interface command to view the information about the
IS-IS-enabled interfaces.
The information displayed by this command includes the interface name, interface IP
address, interface link state and so on. Besides all the information displayed by the
display isis interface command, the display isis interface verbose command will
display the IS-IS configuration information related to the interface, such as CSNP
packets broadcast intervals, Hello packets broadcast intervals and the number of
invalid Hello packets.
Example
# Display the information about the IS-IS-enabled interface.
<3Com> display isis interface
Interface
Vlan-interface1 172.16.1.2 001 Up
# Display the detailed information about the IS-IS-enabled interface.
<3Com> display isis interface verbose
Interface
Vlan-interface1 172.16.1.2 001 Up Up
Secondary IP Address
Csnp Interval
Hello Interval
Hold Time
Lsp Interval
Cost
Priority
Retransmission interval
Chapter 4 Integrated IS-IS Configuration Commands
level-1
level-2
IP Address Id
Link.Sta IP.Sta
IP Address Id
Link.Sta IP.Sta
:
:
L1
:
L1
:
L1
:
:
L1
:
L1
:
4-5
10
10
MTU
Type
Up
1497
L1
MTU
Type
1497
L1
No/No
10
L2
10
10
L2
10
30
L2
30
33
10
L2
10
64
L2
64
5
DIS
No/No
DIS

Advertisement

Table of Contents
loading

Table of Contents