Honda Accord 2008 Manual page 1932

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:41:35 61TA0000_210_0068

A/C Compressor Clutch Check

1. Check the pressure plate for discoloration, peeling,

or other damage. If there is damage, replace the

clutch set (see page 21-68).

2. Check the pulley bearing play and drag by rotating

the pulley by hand. Replace the clutch set with a

new one if it is noisy or has excessive play/drag

(see page 21-68).

3. Measure the clearance between the pulley (A) and

the pressure plate (B) with a dial indicator. Zero out

the indicator, then apply battery voltage to the A/C

compressor clutch. Measure the movement of the

pressure plate when the voltage is applied. If the

clearance is not within the specified limits, the

pressure plate must be reshimmed (see page

NOTE: The shims are available in three

thicknesses: 0.1 mm, 0.3 mm, and 0.5 mm.

0.35 0.60 mm (0.014 0.024 in.)

4. Check resistance of the field coil. If resistance is not

within specifications, replace the field coil

(see page 21-68).

Field Coil Resistance: 3.9 4.3

ＴＡ０８ＡＥ４Ｇ１０１１０１１２０１１ＭＡＡＴ００

at 68°F (20°C)

Chapters

Table of Contents