Ip Vrf Forwarding - Dell Z9500 Command Reference Manual

To delete the descriptive name for a customer VRF, use the no description
string command.
Parameters
string
Defaults None.
Command VRF MODE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.5(0.0)
9.4.(0.0)
Usage
Use this command to specify a descriptive name for a VRF.
Information

ip vrf forwarding

Enables you to attach an interface to a VRF.
Syntax
ip vrf forwarding {vrf-name | management}
To delete an interface associated with a configured VRF, use the no ip vrf
forwarding {vrf-name | management} command.
Parameters
vrf-name
management
Defaults None (Interface is part of default VRF).
Command INTERFACE-CONFIG
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1838
Enter a descriptive name for the VRF.
Description
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S-Series.
Enter name of the VRF that you want to associate the
interface to.
Use this keyword when you want to associate the interface
to the management VRF.
Virtual Routing and Forwarding (VRF)