Defaults
none
Command Modes
CONFIGURATION
Command History
Version 9.0.0.0
Version 8.3.10.0
Related
show ipv6 prefix-list
Commands
maximum-paths
Configure the maximum number of parallel routes (multipath support) BGP supports.
C-Series, E-Series
Syntax
maximum-paths {ebgp | ibgp} number
To return to the default values, use the no maximum-paths command.
Parameters
ebgp
ibgp
number
Defaults
1
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0
Version 7.4.1.0
Usage
If you enable this command, use the clear ip bgp command to recompute the best path.
Information
neighbor activate
This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI.
C-Series, E-Series
Syntax
neighbor {ipv6-address | peer-group-name} activate
To disable, use the no neighbor {ipv6-address | peer-group-name}
activate command.
502
NOTE: There is a 140-character limit for prefix list names.
Introduced on the Z9000.
Introduced on the S4810.
– View the selected IPv6 prefix-list.
Enter the keyword ebgp to enable multipath support for External BGP
routes.
Enter the keyword ibgp to enable multipath support for Internal BGP
routes
Enter a number as the maximum number of parallel paths. The range
is 1 to 16. The default is 1.
Introduced on the E-Series ExaScale.
Introduced