Match Source-Protocol - Dell Z9500 Command Reference Manual

The export-target and import-target support only the match protocol and match
prefix-list options. Other options that are configured in the route-maps are
ignored.
Related ipv6 route-export
Commands

match source-protocol

Enables you to specify matching criteria while exporting or importing routes.
Syntax
match source-protocol {bgp | isis | ospf | connected | static}
Parameters
bgp
isis
ospf
connected
static
Defaults N/A
Command ROUTE MAP MODE
Modes
Command
Version
History
9.7(0.0)
Usage
You can specify the matching criteria only after defining a route-map. Before using
Information
this command, you must enter the route map mode using the route-map route-
map-name command. The match criteria that you specify is associated with the
route-map that you define.
The export-target and import-target support only the match protocol and match
prefix-list options. Other options that are configured in the route-maps are
ignored.
1844
– exports IPv6 routes to another VRF.
Enter the keyword bgp to leak or share routes corresponding
to the BGP protocol.
Enter the keyword isis to leak or share routes corresponding
to the ISIS protocol.
Enter the keyword ospf to leak or share routes
corresponding to the OSPF protocol.
Enter the keyword connected to leak or share connected
routes corresponding to the VRF.
Enter the keyword static to leak or share static routes
corresponding to the VRF.
Description
Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, and Z9500.
Virtual Routing and Forwarding (VRF)