Default-Information Originate - Dell PowerConnect M6348 Cli Reference Manual

Syntax
clear ip ospf [ { configuration | redistribution | counters | neighbor [ interface vlan
neighbor id
] ] } ]
configuration — Reset the OSPF configuration to factory defaults.
•
• redistribution — Flush all self-originated external LSAs. Reapply the redistribution
configuration and re originate prefixes as necessary.
• counters — Reset global and interface statistics.
• neighbor — Drop the adjacency with all OSPF neighbors. On each neighbor's interface, send
a one-way hello. Adjacencies may then be reestablished.
vlan-id — Drop adjacency with all neighbors on a specific interface.
• interface vlan
neighbor-id — Drop adjacency with a specific router ID on a specific interface.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example shows the options for the clear ip ospf command.
console#clear ip ospf ?
<cr>
configuration
counters
neighbor
redistribution

default-information originate

Use the default-information originate command in Router OSPF Configuration mode to
control the advertisement of default routes. Use the no form of the command to return the
default route advertisement settings to the default value.
Press enter to execute the command.
Restore OSPF configuration to defaults
Clear OSPF counters
Bounce all OSPF neighbors
Flush and reoriginate external LSAs
vlan id
[
755