Show Ip Ospf Timers Rate-Limit - Dell C9000 Series Reference Manual

Intf-Down
Wrong-Len
Auth-Error 0
Version
SeqNo-Err
RX
TX
Related clear ip ospf statistics
Commands

show ip ospf timers rate-limit

Show the LSA currently in the queue waiting for timers to expire.
C9000 Series
Syntax
show ip ospf [process-id|vrf vrf-name]timers rate-limit
Parameters
process-id
vrf vrf-name
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Hello-Timer 9, Wait-Timer 0, Grace-Timer 0
Error packets (Only for RX)
0 Non-Dr
0 Invld-Nbr
MD5-Error
0 AreaMisMatch 0
0 Unkown-Pkt
Neighbor ID 9.1.1.2
Hello DDiscr LSReq LSUpd LSAck
59 3 1
62 2 1
Dead-Timer 37, Transmit-Timer
LSU-Q-Len 0, LSU-Q-Wmark
LSR-Q-Len 0, LSR-Q-Wmark
— clears the packet statistics in all interfaces and neighbors.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first OSPF
process.
Enter the keyword vrf and the name of the VRF to view LSAs
corresponding to a specific VRF that are currently in queue
waiting for timers to expire.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
0 Self-Org
0 Nbr-State
0 Cksum-Err
Conf-Issue
0
1 1
0 0
0
0
1
Open Shortest Path First (OSPFv2 and OSPFv3)
0
0
0
0
1560