Redistribute Isis - Dell MXL 10GbE Reference Manual

redistribute isis

Redistribute IS-IS routes into BGP.
Syntax
redistribute isis [level-1 | level-1-2 | level-2] [metric
metric-value | metric-type {external | internal}] [route-map
map-name]
To stop redistribution of IS-IS routes, use the no redistribute isis command.
Parameters
level-1 |
level-1-2 |
level-2]
metric
metric-type
route-map
map-name
Defaults Not configured.
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version 9.2(0.0)
History
redistribute ospf
Redistribute OSPFv3 routes into BGP.
Syntax
redistribute ospf process-id [[match external {1 | 2}] [match
internal]] [route-map map-name]
To stop redistribution of OSPF routes, use the no redistribute ospf
process-id command.
Parameters
process-id
742
(OPTIONAL) Enter the type (level) of routes to redistribute.
(OPTIONAL) Assign metric to an interface for use with IPv6
information.
(OPTIONAL) The external link type associated with the
default route advertised into a routing domain. You must
specify one of the following:
• external
• internal (default)
(OPTIONAL) Enter the keywords route-map then the name
of an established route map.
If the route map is not configured, the default is deny (to
drop all routes).
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the number of the OSPFv3 process. The range is from 1
to 65535.
IPv6 Border Gateway Protocol (IPv6 BGP)