Distribute-List Out - Dell MXL 10GbE Reference Manual

distribute-list out

Suppress network prefixes from being advertised in outbound updates.
Syntax
distribute-list prefix-list-name out [connected | bgp as number
| ospf process-id | rip | static]
To return to the default values, use the no distribute-list prefix-list-
name out [bgp as number connected | ospf process-id | rip |
static] command.
Parameters
prefix-list-
name
connected
ospf process-id
bgp as number
rip
static
Defaults Not configured.
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage You can assign a name to a routing process so a prefix list IS applied to only the
Information routes derived from the specified routing process.
Related
•
Commands
•
distribute-list redistributed-override
Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the
network.
Syntax
distribute-list redistributed-override in
802
Specify the prefix list to filter prefixes in routing updates.
(OPTIONAL) Enter the keyword connected for directly
connected routing process.
(OPTIONAL) Enter the keyword ospf then the OSPF
process-ID number. The range is from 1 to 65535.
(OPTIONAL) Enter the BGP then the AS Number. The range is
from 1 to 65535.
(OPTIONAL) Enter the keyword rip for RIP routes.
(OPTIONAL) Enter the keyword static for user-configured
routing process.
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Introduced on the MXL 10/40GbE Switch IO Module.
distribute-list in — filters the networks received in updates.
redistribute — redistributes routes from one routing domain to another routing
domain.
Intermediate System to Intermediate System (IS-IS)