Avaya S8700 Maintenance Manual page 1875

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

M/T-ANL (Maintenance/Test Analog Port)

Table 8-473. Test #13 Analog Port Digital Loop-Around Test — Continued

Description / Recommendation

Conference test failed on the primary information channel.

1. Run the circuit pack tests to check the Tone-Clock (TONE-BD) circuit pack

2. Resolve any problems that are detected on the Tone-Clock (TONE-BD)

3. If the Tone-Clock and Tone Detector circuit packs are functioning properly,

The primary information channel is not transmitting properly. User may not

notice any interruption in service or may not be able to use this port.

1. Run the circuit pack tests to check the Tone Generator circuit pack and the

2. Resolve any problems that are detected on the Tone Generator circuit pack

3. If the Tone Generator and Tone Detector circuit packs are functioning

The Maintenance/Test analog port analog trunk testing capability is operating

and the Tone Detector circuit pack via the test board UUCSS command.

circuit pack or Tone Detector circuit pack. See the section on Tone

Generator circuit pack.

and the test still fails, replace the Maintenance/Test circuit pack.

Tone Detector circuit pack using test board UUCSS.

or Tone Detector circuit pack. See the section on Tone Generator circuit

properly, and the test still fails, replace the Maintenance/Test circuit pack.

Continued on next page

Issue 1 May 2002

Troubleshooting