Connect An Analog Station Or 2-Wire Digital Station - Avaya S8700 Installing Manual

166 Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Installing and Wiring Telephones
400B2 Adapter Connecting to a Modular Plug
Figure notes
1
2
3
Connect an Analog Station or 2-Wire Digital
Station
This example is typical of the 2-wire digital stations (2420, 64xx, 302D), 2-wire analog stations
(2500), analog Central Office (CO) trunks, Direct Inward Dial (DID) trunks, and external
alarms. See
1 Choose a peripheral to connect (such as a 2-wire digital station).
Choose the port circuit pack to use and its carrier and slot number (from
2
Pack and Telephone Pin Designations'' on page
Line, Cabinet 1, Carrier C, Slot 1.
Choose a port circuit on the port circuit pack, for example port 3.
3
4 Install cross-connect jumpers to connect the pins from the 2-wire digital station to the
appropriate pins on the port circuit pack.
5 Administer using Administrator's Guide for Avaya™ Communication Manager.
Flush-Mounted Information Outlet
Surface-Mounted Information Outlet
To Individual Power Unit
''2500-Type Analog Telephone Wiring'' on page
4 400B2 Adapter
To Telephone
5
6 Destination Service Access Point
(DSAP) Power Cord
167). For example: TN2183 Analog
May 2003
r749428 KLC 060396
167.
''Port Circuit