Avaya S8700 Maintenance Manual page 1911

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

OPS-LINE (DS1 Off-Premises Station Line)

Table 8-486. Test #7 Conference Circuit Test — Continued

Description / Recommendation

The test did not run due to an already existing error on the specific port or due

to a more general error on the circuit pack.

1. Examine the error log for existing errors against this port or the circuit pack

The test was aborted because response to the test was not received within the

allowable time period.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test aborts with error code 2000 again, run short test sequence on

System resources required for this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

and attempt to diagnose the already existing error. (Error code 1793

indicates a problem with the DS1 interface board, and any problems on the

associated DS1-BD or UDS1-BD should be resolved first.)

the associated DS1-BD or UDS1-BD. If tests 138 through 145 on the

associated DS1-BD or UDS1-BD are also aborting with error code 2000,

hyperactivity on the board or facility is indicated. In this case, the

hyperactivity problem should be dealt with first.

Continued on next page

Issue 1 May 2002

Troubleshooting