Show Ip Ospf Database External - Dell S4810 Reference Manual

Network Mask: /0
LS age: 473
Options: (No TOS-capability, No DC, E)
LS type: Summary Asbr
Link State ID: 104.1.50.1
Advertising Router: 1.1.1.10
LS Seq Number: 0x80000010
Checksum: 0x4198
Length: 28
--More--
Related show ip ospf database
Commands

show ip ospf database external

Display information on the AS external (type 5) LSAs.
S4810
Syntax
show ip ospf [process-id | vrf vrf-name] database external
[link-state-id] [adv-router ip-address]
Parameters
process-id
vrf vrf-name
link-state-id
adv-router ip-
address
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Open Shortest Path First (OSPFv2 and OSPFv3)
TOS: 0 Metric: 2
— displays OSPF database information.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Enter the keyword vrf followed by the name of the VRF to
view information on AS external LSAs corresponding to the
OSPF processes that are tied to a specific VRF.
(OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
• the network's IP address for Type 3 LSAs or Type 5 LSAs
• the router's OSPF router ID for Type 1 LSAs or Type 4
LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords adv-router and the ip-
address to display only the LSA information about that
router.
EXEC
EXEC Privilege
1195