Dot1X Handshake; Dot1X Mandatory-Domain - 3Com S7906E Command Reference Manual

# Specify port GigabitEthernet 2/0/7 to use VLAN 3 as its guest VLAN.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/7
[Sysname-GigabitEthernet2/0/7] dot1x guest-vlan 3

dot1x handshake

Syntax
dot1x handshake
undo dot1x handshake
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the dot1x handshake command to enable the online user handshake function so that the device
can periodically send handshake messages to the client to check whether a user is online.
Use the undo dot1x handshake command to disable the function.
By default, the function is enabled.
Note that:
The 802.1X proxy detection function depends on the online user handshake function. Be sure to
enable handshake before enabling proxy detection and to disable proxy detection before disabling
handshake.
To ensure that the online user handshake function can work normally, you are recommended to
use the iNode client software.
Examples
# Enable online user handshake.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/4
[Sysname-GigabitEthernet2/0/4] dot1x handshake

dot1x mandatory-domain

Syntax
dot1x mandatory-domain domain-name
undo dot1x mandatory-domain
View
Interface view
1-8