Cambium Networks PTP 820 Series User Manual page 88

Chapter 1: Introduction
Sub-Menus
Interfaces > Groups > LAG
PM & Statistics > RMON
PM & Statistics > Egress CoS Statistics
PM & Statistics > Port TX
PM & Statistics > Port RX
QoS > Classification > 802.1Q
QoS > Classification > 802.1AD
QoS > Classification > DSCP
QoS > Classification > MPLS
QoS > Policer > Policer Profile
QoS > Marking > 802.1Q
QoS > Marking > 802.1AD
QoS > WRED > WRED Profile
QoS > Shaper > Queue Profiles
QoS > Shaper > Service Bundle Profiles
QoS > Scheduler > Priority Profiles
QoS > Scheduler > WFQ Profiles
Protocols > G.8032 > General Attribute
Protocols > G.8032 > ERPI Attribute
Protocols > MSTP > Bridge > General Attributes
Protocols > MSTP > Bridge > Configuration ID
Protocols > MSTP > Bridge > Spanning Tree
Protocols > MSTP > Bridge > CIST
Protocols > MSTP > Bridge > MSTI
Reference Guide to Web EMS Menu Structure
For Further Information
Configuring Link Aggregation (LAG) and
LACP.
RMON Statistics
Egress CoS Statistics
Port TX Statistics
Port RX Statistics
Modifying the C-VLAN 802.1Q UP and CFI Bit
Classification Table
Modifying the S-VLAN 802.1 UP and DEI Bit
Classification Table
Modifying the DSCP Classification Table
Modifying the MPLS EXP Bit Classification
Table
Configuring Policer Profiles
Modifying the 802.1Q Marking Table
Modifying the 802.1AD Marking Table
Configuring WRED
Configuring Queue Shaper Profiles
Configuring Service Bundle Shaper Profiles
Configuring Priority Profiles
Configuring WFQ Profiles
Configuring the Destination MAC Address
Adding ERPIs through Viewing ERPI Statistics
Enabling MSTP and Configuring the MSTP
Bridge General Attributes
Viewing and Configuring the MSTP Bridge
Configuration ID
Viewing and Configuring the MSTP Bridge
Spanning Tree
Viewing and Configuring the MSTP Bridge
CIST Parameters
Viewing and Configuring the MSTP Bridge
MSTI Parameters
phn-3965_006v002
Page 1-42