Cambium Networks PTP 820 Series User Manual page 360

Chapter 5: Radio Configuration
Figure 179 Aggregate PM Report Page
2. In the Port field, select the port that holds the radio for which you want to display PMs.
Note
The Slot field always displays Slot #1
3. In the Interval Type field:
o
To display reports in 15-minute intervals, select 15 minutes.
o
To display reports in daily intervals, select 24 hours.
Table 55 describes the Modem BER (Aggregate) PMs.
Note
To display the same parameters for a specific interval in a separate page, select the interval in the
Modem BER PM table and click View.
Table 55 Modem BER (Aggregate) PMs
Parameter
Interval
ES
SES
Definition
For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
Displays the number of seconds in the measuring interval during which
errors occurred.
Displays the number of severe error seconds in the measuring interval.
phn-3965_006v002
Page 5-46
Configuring and Viewing Radio PMs and Statistics