Cambium Networks PTP 820 Series User Manual page 858

Chapter 18: Ethernet Services and Interfaces (CLI)
To delete a description, go to interface view for the interface and enter the following command:
eth type eth [x/x]>description delete
To display an interface's description, go to interface view for the interface and enter the following command:
eth type eth [x/x]>description show
Table 209 Interface Description CLI Parameters
Parameter Input Type
description Text String
The following command adds the description "Line" to Ethernet port 2:
eth type eth [1/2]>description set Line
Permitted Values Description
Up to 40 characters Adds a text description to the interface.
phn-3965_006v002
Page 18-39
Configuring Ethernet Interfaces (CLI)