Chapter 8: Ethernet Protocols
To display the unit's management parameters, as transmitted by the LLDP agents:
1.
Select Ethernet > Protocols > LLDP > Advanced > Local System > Management. The LLDP Local System
Management page opens.
Figure287 LLDP Local System Management Page
2.
To display all the parameters, select a row and click View.
Figure 288 LLDP Local System Management – View Page
Table 94
describes the parameters in the LLDP Local System Management page. These parameters are read-only.
phn-3965_006v002
Page 8-49
Configuring LLDP