Cambium Networks PTP 820 Series User Manual page 617

Chapter 11: Access Management and Security
Figure 363 Radius Configuration Page
2. In the Radius Admin field, select Enable.
3. Click Apply
4. .
Configuring the RADIUS Server Attributes
To configure the RADIUS server attributes:
1. Select Platform > Security > Access Control > Radius > Radius Configuration. The Radius Configuration page
opens (Figure 363).
2. In the Radius Configuration table, select the line that corresponds to the RADIUS server you want to
configure:
o
Select Server ID 1 to configure the Primary Radius server.
o
Select Server ID 2 to configure the Secondary Radius server.
3. Click Edit. The Radius Configuration – Edit page opens.
phn-3965_006v002
Page 11-13
Configuring RADIUS