Cambium Networks PTP 820 Series User Manual page 913

Chapter 19: Quality of Service (QoS) (CLI)
root> ethernet qos wfq-weight-profile-tbl show profile-id <profile-id>
To delete a WFQ profile, enter the following command in root view:
root> ethernet qos wfq-weight-profile-tbl delete profile-id <profile-id>
You can only delete WFQ profile if the profile is not attached to any interface.
Table 251 WFQ Profile CLI Parameters
Parameter
Input Type
profile-id Number
cos0-weight Number
cos1- weight Number
cos2- weight Number
cos3- weight Number
cos4- weight Number
cos5- weight Number
cos6- weight Number
cos7- weight Number
The following command configures a WFQ profile with Profile ID 2.
root> ethernet qos wfq-weight-profile-tbl add profile-id 2 cos0-weight 15
cos1-weight 15 cos2-weight 15 cos3-weight 15 cos4-weight 15 cos5-weight
15 cos6-weight 15 cos7-weight 20
This profile has the parameters listed in the following table. Note that the yellow queue weight is constant and
cannot be changed. This means that all best effort traffic (yellow) will always have the same weight, regardless of
CoS.
Table 252 WFQ Sample Profile Parameters
CoS Queue Weight (Green)
0 15
1 20
2 20
3 20
4 20
5 20
Permitted
Values Description
2 – 6 A unique ID to identify the profile.
1 - 20 The relative weight for the CoS 0 queue.
1 - 20 The relative weight for the CoS 1 queue.
1 - 20 The relative weight for the CoS 2 queue.
1 - 20 The relative weight for the CoS 3 queue.
1 - 20 The relative weight for the CoS 4 queue.
1 - 20 The relative weight for the CoS 5 queue.
1 - 20 The relative weight for the CoS 6 queue.
1 - 20 The relative weight for the CoS 7 queue.
Queue Weight (Yellow – not
visible to users, and cannot be
edited)
20
20
20
20
20
20
phn-3965_006v002
Page 19-46
Configuring Scheduling (CLI)