Chapter 11: Access Management and Security
Figure 369 Server Manager – Creating a RADIUS Client
3
In the New RADIUS Client window:
i
Select the Enable this RADIUS client check box.
ii
Enter a descriptive Friendly name for the device, such as
iii
Enter the device IP Address.
iv
Select RADIUS Standard as the Vendor name.
v
In the Shared Secret section, select Manual, and enter a Shared secret, then enter it again in Confirm
shared secret. Note down the secret because you will need to enter the same value in the Secret field of
the Radius Configuration – Edit page
PTP 820X
(Figure
364).
phn-3965_006v002
Page 11-19
Configuring RADIUS
.