Cambium Networks PTP 820 Series User Manual page 959

Chapter 20: Ethernet Protocols (CLI)
•
Remote Mng IF subType
defining the interface number, associated with the remote system. Possible values are:
o
unknown(1)
o
ifIndex(2)
o
systemPortNumber(3)
•
– The OID value used to identify the type of hardware component or protocol entity
Agent Rem OID
associated with the management address advertised by the remote system agent.
Table 277 LLDP Local System CLI Parameters
Parameter Input Type
interface Variable
slot Number
port Number
agent-start- Number
time
– The enumeration value that identifies the interface numbering method used for
Permitted Values
eth
radio
pwe
1
ethernet: 1-6
radio: 1-2
management: 1-2
tdm: 1
dd-mm-yyyy,hh:mm:ss,
where:
dd = date
mm = month
yyyy= year
hh = hour
mm = minutes
ss = seconds
phn-3965_006v002
Page 20-36
Description
Enter the type of interface:
eth – Ethernet
– Radio
radio
– TDM
pwe
A filter that enables you to view data
that was added to the database starting
from the defined time.
Configuring LLDP (CLI)