Cambium Networks PTP 820 Series User Manual page 364

Chapter 5: Radio Configuration
2. In the Interface field, select the radio interface for which you want to display PMs.
3. In the Interval Type field:
o
To display reports in 15-minute intervals, select 15 minutes.
o
To display reports in daily intervals, select 24 hours.
Table 57 describes the XPI PMs.
Note
To display the same parameters for a specific interval in a separate page, select the interval in the
Modem XPI PM table and click View.
Table 57 XPI PMs
Parameter
Interval
Min XPI (dB)
Max XPI (dB)
XPI below threshold
seconds
Definition
For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
The minimum XPI level that was measured during the interval.
The maximum XPI level that was measured during the interval.
The number of seconds the measured XPI level was below the threshold
during the interval. XPI thresholds are configured in the Radio Thresholds
page. See Configuring BER Thresholds and Displaying Current BER.
phn-3965_006v002
Page 5-50
Configuring and Viewing Radio PMs and Statistics