Cambium Networks PTP 820 Series User Manual page 835

Chapter 18: Ethernet Services and Interfaces (CLI)
Parameter Input Type
group Variable
slot Number
port Number
vlan Number or
Variable
outer-vlan Number
inner-vlan Number
sp-name Text string
Permitted Values Description
rp1 When you are defining the service point on a 1+1
rp2 HSB group, a LAG group, or a Multi-Carrier ABC
rp3 group, use this parameter instead of the interface
rp4 parameter to identify the group. The group must
lag1 be defined before you add the service point. See:
lag2
•
Configuring HSB Radio Protection (CLI)
lag3
•
Configuring Link Aggregation (LAG) and LACP
lag4
(CLI)
mc-abc1
•
Configuring Multi-Carrier ABC (CLI)
mc-abc2
mc-abc3
mc-abc4
1
ethernet: 1-6 The port on which the service point is located.
radio: 1-2
management: 1-2
tdm: 1
1-4094, or Defines the VLAN classified to the service point.
Untagged
This parameter should not be included for service
points with an interface type of bundle-C-tag. For
instructions on attaching a bundled VLAN, refer to
Attaching a VLAN Bundle to a Service Point.
This parameter is also not relevant for:
Service points with an interface type of qinq and
all-to-one.
Pipe service points.
1-4094, or Defines the S-VLAN classified to the service point.
Untagged
This parameter is only relevant for service points
with the interface type bundle-s-tag or qinq.
1-4094, or Defines the C-VLAN classified to the service point.
Untagged
This parameter is only relevant for service points
with the interface type qinq.
Up to 20 A descriptive name for the service point (optional).
characters.
phn-3965_006v002
Page 18-16
Configuring Ethernet Services (CLI)