Cambium Networks PTP 820 Series User Manual page 842

Chapter 18: Ethernet Services and Interfaces (CLI)
Table 192 C-VLAN Preservation CLI Parameters
Parameter Input Type
sp-id Number
c-vlan Variable
preservation
mode
The following command enables C-VLAN preservation for Service Point 1 on Service 37:
service[37]>sp cvlan-preservation-mode set spid 1 mode enable
The following command disables C-VLAN preservation for Service Point 1 on Service 37:
service[37]>sp cvlan-preservation-mode set spid 1 mode disable
Configuring S-VLAN CoS Preservation (CLI)
To configure CoS preservation for S-VLAN-tagged frames, go to service view for the service and enter the following
command:
service[SID]>sp svlan-cos-preservation-mode set spid <sp-id> mode <s-
vlan cos preservation mode>
Permitted Values Description
1-32 for P2P and
The Service Point ID.
MP services.
1-30 for MNG
services.
enable Determines whether the original C-VLAN ID is
disable preserved or restored for frames egressing from
the service point.
enable
service point is the same as the C-VLAN ID when
the frame entered the service.
disable
service point is set at whatever value might have
been re-assigned by the interface, service point, or
service, or whatever value results from marking
(see
phn-3965_006v002
Page 18-23
Configuring Ethernet Services (CLI)
– The C-VLAN ID of frames egressing the
– The C-VLAN ID of frames egressing the
Configuring Marking (CLI)).