Chapter 8: Ethernet Protocols
Figure 264 MSTP Bridge Configuration ID Page
2
Modify the configurable parameters.
3
Click Apply.
Table 76
lists and describes the parameters in the MSTP Bridge Configuration ID page.
Table 76 MSTP Bridge Configuration ID Parameters
Parameter
MSTP Configuration ID Format
Selector
MSTP Configuration Name
MSTP Configuration Digest
MSTP Revision Level
Definition
Read-only. Indicates the format specified in 802.1Q.
Enter a valid configuration name.
Note:
Changing the Configuration Name when MSTP is enabled causes
the MSTP stack to reset.
Read-only. Displays the MSTP Configuration Digest.
Enter a valid MSTP revision level.
Note:
Changing the Revision Level when MSTP is enabled causes the
MSTP stack to reset.
phn-3965_006v002
Page 8-19
Configuring MSTP